Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0716
TCM detects the transmission input shaft speed signal dropped greater than 1,350 RPM for 1s.
P0717 - Condition 1
TCM detects the transmission input shaft speed signal is less than 33 RPM for 5s.
P0717 - Condition 2
The TCM detects that P0722 set and the Transmission input speed is less than 1,000 RPM for 5 s.
P07BF
Transmission ISS sensor analog signal voltage is 0.25V or less for 4s.
P07C0
Transmission ISS sensor analog signal voltage is 4.75volts or greater for 4s.