Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0667
- DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401, P042E, P0658, P0667, P0668, P0669, P06AD, P06AE, P0712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
- Engine torque signal is valid.
- Ignition voltage is 9-32V.
- Engine speed is 400-7,500 RPM for 5s.
- Throttle position signal is valid.
- Runs continuously when above conditions are met.
P0668
- DTC P0668 is not set.
- Ignition voltage is 9-32V.
- Engine speed is 400-7,500 RPM for 5s.
- Runs continuously when above conditions are met.
P0669
- DTC P0669, P0716, P0717, P0722, or P0723 is not set.
- Ignition voltage is 9-32V.
- Engine speed is 400-7,500 RPM for 5s.
- Runs continuously when above conditions are met.