Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0068, P0101, P0102, P0103, P0112, P0113, P0117, P0118, P0121, P0122, P0123, P0171, P0172, P0201-P204, P0222, P0223, P0261, P0262, P0264, P0265, P0267, P0268. P0270, P0271, P0300-P0304, P0351-P0354, P0461-P0464, P0496, P0627, P0628, P0629, P0722, P1248, P1249, P124A, P124B, P1516, P2066-P2068, P2147, P2148, P2150, P2151, P2153, P2154, P2156, or P2157 are not set.
The barometric pressure (BARO) is greater than 70kPa.
The engine coolant temperature (ECT) is greater than 60°C (140°F).
The engine run time is greater than 60s.
The ignition voltage is greater than 11V but less than 18V.
The transmission is not changing gears.
The torque converter clutch (TCC) is not changing states.
The intake air temperature (IAT) is warmer than -20°C (-4°F).
The vehicle speed is less than 3km/h (2 mph).
The commanded engine speed is steady within 25 RPM.
The engine is idling for greater than 10s.
The DTCs run when the above conditions are met.