Conditions for Running the DTC

P0340 or P0365 Condition 1

• DTCs P0101, P0102, and P0103 are not set.
• The airflow into the engine is greater than 3g/s.

  OR

• The starter is engaged and the engine control module detects camshaft position sensor pulses.

Condition 2

• DTC P0651 is not set.
• The engine is running and the starter is not engaged.

Condition 3

• DTC P0335, P0336, P0641, or P0651 are not set.
• The crankshaft is synchronized.
• The starter is engaged.

Condition 4

• DTC P0335, P0336, P0641, or P0651 are not set.
• The crankshaft is synchronized.

P0341 or P0366 Condition 1

• DTC P0335, P0336, P0641, or P0651 are not set.
• The crankshaft is synchronized.
• The starter is engaged.

Condition 2

• DTC P0335, P0336, P0641, or P0651 are not set.
• The crankshaft is synchronized.

The DTCs run continuously once the above conditions are met.