Conditions for Running the DTCs

WARNING: This page is about a different variant/trim than selected.

P0325 and P0330

Engine is running for 2s or greater.
Engine speed is between 400-5,500 RPM for 100 or more cumulative revolutions.
Engine air flow is between 10-2000mg per cylinder.
The engine coolant temperature (ECT) is -40°C (-40°F) or warmer.
The intake air temperature (IAT) Sensor 1 is -40°C (-40°F) or warmer.

P0327 or P0328

Engine speed is less than 8,500 RPM.

The DTCs run continuously when the above conditions are met.