Fastener Tightening Specifications (Off-Vehicle)

WARNING: This page is about a different variant/trim than selected.

Application	Ref No.*	Quantity	Size	Specification
Application	Ref No.*	Quantity	Size	Metric	English
A/Trans Auxiliary Fluid Pump Outlet Bolt (Hybrid Models)	350	4		22 N.m	16 lb ft
A/Trans Auxiliary Fluid Pump Bolt (Hybrid Models)	355	1		22 N.m	16 lb ft
A/Trans Auxiliary Fluid Pump (Pump to Motor) Bolt (Hybrid Models)	370	4		10-12 N.m	89-106 lb in
A/Trans Fluid Pump Bolt to Converter Housing
First Pass	200	8 6T40	M8x33	10 N.m	89 lb in
Final Pass	200	8 6T40	M8x33	45°
A/Trans Fluid Pump Cover Bolt	302	23 6T40	M6x25	12 N.m	106 lb in
A/Trans Fluid Pump Cover Bolt	320	20 6T30,	M6x21.5	12 N.m	106 lb in
Control Solenoid Valve Assembly (w/TCM and Body) to Case Bolt	4	12	M6x97	10 N.m	89 lb in
Control Solenoid Valve Assembly (w/TCM and Body) to Case Bolt	6	3	M5x40.5	7 N.m	62 lb in
Control Valve Body Assembly (Complete) Bolt	400	1	M5x40.5	7 N.m	62 lb in
Control Valve Body to Case Bolt	9	2	M6x53	11 N.m	97 lb in
Control Valve Body to Case Bolt	10	9	M6x60	11 N.m	97 lb in
Control Valve Body Cover Bolt	1	13	M6x30	12 N.m	106 lb in
Drain Plug	64	1	1/827NPTF	12 N.m	106 lb in
Fluid Level Hole Plug	63	1	1/8" 27 NPTF	12 N.m	106 lb in
Fluid Pressure Test Hole Plug	51	1	1/8" 27 NPTF	12 N.m	106 lb in
Front Differential Carrier Baffle BoltConverter Housing	204	2	M6x25	12 N.m	106 lb in
Front Differential Carrier Baffle BoltCase	61	2	M6x16 6T40	12 N.m	106 lb in
Input Shaft Support Bolt	57	3	M6x50	12 N.m	106 lb in
Input Speed Sensor Bolt	21	1	M6x23	9 N.m	80 lb in
Manual Shift Detent Spring	17	1	M6x16	12 N.m	106 lb in
Output Speed Sensor Bolt	15	1	M6x18	9 N.m	80 lb in
Torque Converter and Differential Housing Bolt
First Pass	27	15 6T40	M8x30	10 N.m	89 lb in
Final Pass	27	15 6T40	M8x30	50°
*Reference number refers to the component callout number in Disassembled Views