Shift Indicator Indicates Wrong Gear Selection
WARNING: This page is about a different variant/trim than selected.
| Checks |
Causes |
| Shift Cable |
- Inspect for damage.
- Verify proper attachment to shifter.
- Verify cable is locked into shifter bracket.
- Verify cable is properly attached to the transmission.
- Verify that the cable is locked into the transmission bracket.
- Verify proper cable adjustment. Refer to Range Selector Lever Cable Adjustment
.
|
| Manual Shaft |
- Verify shift lever is properly attached to the manual shaft.
- Verify manual shaft is not twisted or damaged.
|
| Manual Shift Detent Lever with Shaft Position Switch Assembly, IMS |
Verify proper operation. Refer to Transmission Internal Mode Switch Logic
. |