Harsh or Late First, Second, Third, and Fourth Shift
WARNING: This page is about a different variant/trim than selected.
| Checks |
Causes |
| Low/Reverse and 1-2-3-4 Clutch Housing (551) |
- Inspect for damaged or broken 1-2-3-4 Clutch Piston (552) and piston seals damaged, worn or leaking.
- Inspect for fatigued or binding 1-2-3-4 Clutch Piston Return Spring (553).
- Inspect for improper surface finish on 1-2-3-4 Clutch Plates (557559). Refer to Clutch Plate Diagnosis .
- Inspect for broken or fatigued 1-2-3-4 Clutch Waved Plate (557).
- Inspect for plugged or restricted Low/Reverse and 1-2-3-4 Clutch Piston Housing (551) air bleed.
|
| Case Assembly (50) |
- Inspect for leaking or loose fitting Fluid Check Valve (55).
- Inspect for leaking or damaged 1-2-3-4 and Low/Reverse Clutch Fluid Passage Seals (67).
|