Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2728
TCM detects an internal electrical performance malfunction of the pressure control solenoid valve 5 control circuit where the measured clutch pressure control solenoid valve 5 current does not equal the commanded clutch pressure control solenoid valve 5 current for 5s.
P2729
TCM detects a short to ground on the clutch pressure control solenoid valve 5 control circuit for 1s.
P2730
TCM detects an open or short to voltage on the clutch pressure control solenoid valve 5 control circuit for 1s.