Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2719
TCM detects an internal electrical performance malfunction on the clutch pressure solenoid valve 4 control circuit where the measured clutch pressure control solenoid valve 4 current does not equal the commanded clutch pressure control solenoid valve 4 current for 5s.
P2720
TCM detects a short to ground on the clutch pressure control solenoid valve 4 control circuit for 1s.
P2721
TCM detects an open or short to voltage on the clutch pressure control solenoid valve 4 control circuit for 1s.