LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.4L) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the flywheel. Refer to Engine Flywheel Replacement 
    2. Fig 1: Crankshaft Rear Oil Seal
    GM2568074Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not damage the outside diameter of the crankshaft or chamber with any tool.

  2. Use a suitable tool to remove the crankshaft rear oil seal (1).
scientia non olet · About LEMON Manuals