LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.4L) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
Fig 1: Crankshaft Real Oil Seal
GM2568075Courtesy of GENERAL MOTORS COMPANY
  1. Using the (2) EN-42067  installer , install a NEW crankshaft real oil seal (1).
  2. Install the flywheel. Refer to Engine Flywheel Replacement .
scientia non olet · About LEMON Manuals