LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions >> Repair Instructions >> Evaporative Emission Line Replacement - Engine to Chassis (FWD) >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Remove the evaporative emission front pipe. Refer to Evaporative Emission Front Pipe Replacement (LTG)  .
    2. Fig 1: Evaporative Emission Pipe And Retainers
    GM2868544Courtesy of GENERAL MOTORS COMPANY
  2. Remove the evaporative emission pipe (1) from the retainers (2).
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    4. Fig 2: Evaporative Emission Pipe
    GM2820659Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the evaporative emission pipe (1) and remove from retainers (2). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Remove the evaporative emission pipe (1) from the vehicle.
scientia non olet · About LEMON Manuals