Circuit/System Description
The intake air temperature (IAT) Sensor 1 is a variable resistor that measures the temperature of the air in the sensor bore. The engine control module (ECM) supplies 5V to the IAT Sensor 1 signal circuit and a ground for the IAT Sensor 1 low reference circuit. The signal varies with inlet air temperature and is displayed by the scan tool as °C (°F).
The multifunction intake air sensor houses the following:
- IAT Sensor 1
- IAT Sensor 2
- Humidity sensor
- Mass Air Flow (MAF) sensor
- BARO pressure sensor
IAT Sensor 1 - Temperature, Resistance, Voltage Table
| IAT Sensor 1 | IAT Sensor 1 Resistance | IAT Sensor 1 Signal Voltage |
|---|---|---|
| Cold | High | High |
| Warm | Low | Low |