LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Switch Replacement (AWD) >> Removal Procedure

Removal Procedure

  1. Remove the oil pan. Refer to Oil Pan Replacement (AWD) .
  2. Fig 1: Engine Oil Level Sensor
    GM3406322Courtesy of GENERAL MOTORS COMPANY
  3. Remove the engine oil level sensor retainer (1).
  4. Fig 2: Engine Oil Level Sensor Connector
    GM3406328Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect the engine oil level sensor connector (1) from the oil pan and the retainer (2). Discard the O-ring.
  6. Fig 3: Lower Oil Pan
    GM3406317Courtesy of GENERAL MOTORS COMPANY
  7. Remove the lower oil pan (2) and fasteners (1).
  8. Fig 4: Engine Oil Level Sensor
    GM3406332Courtesy of GENERAL MOTORS COMPANY
  9. Remove the engine oil level sensor fasteners (1).
  10. Remove the engine oil level sensor (2) from the oil pan.