LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Flywheel Replacement (M/T) >> Removal Procedure

Removal Procedure

  1. Remove the clutch assembly. Refer to Clutch Assembly Replacement .
    2. Fig 1: Flywheel Holding Tool & Starter Motor Bolts
    GM2872018Courtesy of GENERAL MOTORS COMPANY
  2. To prevent crankshaft rotation, install EN-50792  holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the flywheel.
    3. Fig 2: Flywheel & Attaching Bolts
    GM2872020Courtesy of GENERAL MOTORS COMPANY
  3. Remove and discard the flywheel attaching bolts (1).
  4. Remove the flywheel (2).
  5. Remove EN 50792  holding tool.
scientia non olet · About LEMON Manuals