LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

  1. If equipped with an automatic transmission, remove the flex plate. Refer to Automatic Transmission Flex Plate Replacement .
  2. If equipped with a manual transmission, remove the flywheel. Refer to Engine Flywheel Replacement .
    3. Fig 1: Crankshaft Rear Oil Seal
    GM2812543Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not damage the outside diameter of the crankshaft or chamber with any tool.

  3. Use a suitable tool to remove the crankshaft rear oil seal (1).
scientia non olet · About LEMON Manuals