LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Installation Procedure

Installation Procedure

Fig 1: Crankshaft Real Oil Seal
GM2812544Courtesy of GENERAL MOTORS COMPANY
  1. Using the (2) EN-51380  seal installer , install a NEW crankshaft real oil seal (1).
  2. If equipped with a manual transmission, install the flywheel and transmission. Refer to Engine Flywheel Replacement .
  3. If equipped with an automatic transmission, install the automatic transmission flex plate and transmission. Refer to Automatic Transmission Flex Plate Replacement .
scientia non olet · About LEMON Manuals