LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Engine Block Cleaning and Inspection >> Measuring Cylinder Bore Diameter

Measuring Cylinder Bore Diameter

    Fig 1: Measuring Cylinder Bore
    GM4972Courtesy of GENERAL MOTORS COMPANY
  1. Measure the cylinder bore diameter 35 mm (1.378 in) from the deck face using the EN-8087   gauge.
  2. Compare your results with the Engine Mechanical Specifications (LTG) . If the cylinder diameter exceeds the specifications, replace the engine block.
scientia non olet · About LEMON Manuals