LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Camshaft Cover Removal (LTG)

Camshaft Cover Removal (LTG)

    Fig 1: PCV Valve Bolt
    GM3962776Courtesy of GENERAL MOTORS COMPANY
  1. Remove the PCV valve bolts (1).
  2. Remove the PCV hose bolt (2) from the camshaft cover.
    3. NOTE:

    PCV valves and PCV tube assembly have tamper-proof connections and cannot be disassembled.

  3. Remove the PCV valves and PCV tube assembly.
    4. Fig 2: Engine Coolant Air Bleed Pipe
    GM3962778Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine coolant air bleed pipe bolt (1).
  5. Remove the engine coolant air bleed pipe (2), hose (3), and O-ring (4). Inspect O-ring and discard if necessary.
    6. Fig 3: Oil Level Indicator
    GM3962779Courtesy of GENERAL MOTORS COMPANY
  6. Remove the oil level indicator (1). Inspect and replace the oil indicator O-ring seals (4), if necessary.
  7. Remove the camshaft cover heat shield (2) and bolts (3).
    8. Fig 4: Rear Lift Bracket
    GM3962781Courtesy of GENERAL MOTORS COMPANY
  8. Remove the rear lift bracket (1) and bolts (2).
    9. Fig 5: Front Lift Bracket
    GM2726742Courtesy of GENERAL MOTORS COMPANY
  9. Remove the front lift bracket (2) and bolts (1).
    10. Fig 6: Ignition Coils
    GM3962782Courtesy of GENERAL MOTORS COMPANY
  10. Remove the ignition coils (2) and bolts (1).
    11. Fig 7: Camshaft Position Actuator Control Solenoid Valves
    GM3962783Courtesy of GENERAL MOTORS COMPANY
  11. Remove the camshaft position actuator control solenoid valves (2) and bolts (1).
    12. Fig 8: Vacuum Assembly And Bolts
    GM2726747Courtesy of GENERAL MOTORS COMPANY
  12. Remove the vacuum assembly (2) and bolts (1).
  13. Remove the vacuum assembly gasket (3) and discard.
    14. Fig 9: Camshaft Cover Assembly
    GM3962785Courtesy of GENERAL MOTORS COMPANY
  14. Remove the camshaft cover assembly (2) and bolts (1, 3).
  15. Remove and discard the camshaft cover gasket (4).
scientia non olet · About LEMON Manuals