Automatic Transmission Flex Plate Removal

Special Tools 

EN 50792  Flywheel Holding Tool

For equivalent regional tools, refer to Special Tools .

Fig 1: Starter Motor Bolts
Courtesy of GENERAL MOTORS COMPANY
1. To prevent crankshaft rotation, install EN 50792  holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the flywheel.
Fig 2: Automatic Flex Plate Attaching Bolts
Courtesy of GENERAL MOTORS COMPANY
2. Remove and discard the flywheel attaching bolts (1).
3. Remove the flywheel (2).
4. Remove EN 50792  holding tool.