LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC P06DA-P06DC: Engine Oil Pressure Control Solenoid Valve >> Component Testing

Component Testing

Static Test

  1. Ignition OFF, disconnect the harness connector at the Q44 Engine Oil Pressure Control Solenoid Valve.
  2. Test for 10-30Ω between the control terminal 2 and the ignition voltage terminal 1.
    • If not between 10.0-30.0Ω 

      Replace the Q44 Engine Oil Pressure Control Solenoid Valve.

    • If between 10.0-30.0Ω 
  3. Test for infinite resistance between each terminal and the Q44 Engine Oil Pressure Control Solenoid Valve housing.
    • If not infinite 

      Replace the Q44 Engine Oil Pressure Control Solenoid Valve.

    • If infinite 
  4. All OK.
scientia non olet · About LEMON Manuals