LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Coolant Fan Shroud Replacement (LTG)

Engine Coolant Fan Shroud Replacement (LTG)

Fig 1: Engine Coolant Fan Shroud (LTG)
GM2866978Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the radiator inlet hose from the radiator. Refer to Radiator Inlet Hose Replacement (LTG) .
  2. Disconnect the engine coolant fan motor electrical connectors.
  3. Unclip the wiring harness from the shroud.
  4. Release the transmission lines from the fan shroud retainers.
1 Engine Coolant Fan Shroud Bolt (Qty:2)
CAUTION:

Refer to Fastener Caution .
2 Engine Coolant Fan Shroud
Procedure 
Tilt the engine coolant fan shroud towards the engine and lift it off the radiator.
scientia non olet · About LEMON Manuals