Circuit/System Verification
- Ignition ON.
- Verify an audible click is heard or felt from cooling fan Relays 1, 2, and 3 when commanding the cooling fans ON and OFF with a scan tool.
- If a click is not heard or felt at one or more of the Relays
Refer to Circuit/System Testing
- If a click is heard or felt at each of the Relays
- If a click is not heard or felt at one or more of the Relays
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing
- If the DTC does not set
- If the DTC sets
- All OK.