A22 Radio Controls (UEW)
|
|
Connector Part Information
- Harness Type: Instrument Panel
- OEM Connector: 13235933
- Service Connector: 13576543
- Description: 8-Way F (BK)
|
Terminal Part Information
| Terminal Type ID |
Terminated Lead |
Diagnostic Test Probe |
Terminal Removal Tool |
Service Terminal |
Tray |
Core Crimp |
Insulation Crimp |
| I |
Not Available |
Not Available |
Not Available |
Not Available |
Not Available |
Not Available |
Not Available |
| Pin |
Size |
Color |
Circuit |
Function |
Terminal Type ID |
Option |
| 1 |
0.75 |
RD/D-GN |
3140 |
Battery Positive Voltage |
I |
- |
| 2 |
0.35 |
VT |
3290 |
Integrated Center Stack Reset Signal |
I |
- |
| 3 |
0.35 |
GY/GN |
3291 |
Integrated Center Stack Wake Up Signal |
I |
- |
| 4 |
0.75 |
GY |
9037 |
Local Interconnect Network Bus |
I |
KRJ |
| 5 |
0.75 |
BK |
1750 |
Ground |
I |
- |
| 6 |
0.35 |
BARE* |
7460 |
Integrated Center Stack Serial Data Shield |
I |
- |
| 7 |
0.35 |
D-GN/VT |
7458 |
Integrated Center Stack Serial Data High |
I |
- |
| 8 |
0.35 |
YE |
7459 |
Integrated Center Stack Serial Data Low |
I |
- |
| BARE wires may have an insulation material at the point where the wire enters the connector cavity that protects adjacent wires from potential short circuits. These insulators may extend into the harness bundle and the bare wire may not be noticeably visible. |