LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Electronic Suspension Position Sensor Front Jumper Harness Disconnection >> Removal Procedure

Removal Procedure

    Fig 1: Connector Position Assurance (CPA) Clip
    GM2837710Courtesy of GENERAL MOTORS COMPANY
  1. Locate the connector position assurance (CPA) clip (1), which is in the locked position.
    2. Fig 2: Unlocking CPA
    GM2837715Courtesy of GENERAL MOTORS COMPANY
  2. Unlock the CPA.
    3. Fig 3: Locking Part To Right And Disconnect Cable
    GM2837717Courtesy of GENERAL MOTORS COMPANY
  3. Twist the locking part to the right and disconnect the cable (2).
scientia non olet · About LEMON Manuals