LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Electronic Suspension Position Sensor Front Jumper Harness Disconnection >> Installation Procedure

Installation Procedure

    Fig 1: Twisting Back Locking Part
    GM2837721Courtesy of GENERAL MOTORS COMPANY
  1. Twist back the locking part.
  2. Place the CPA in the locked position prior to re-connecting the cable.
scientia non olet · About LEMON Manuals