LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Delphi Connectors (Steering Gear) >> Removal Procedure

Removal Procedure

    Fig 1: Releasing Locking Tab On Connector
    GM2374629Courtesy of GENERAL MOTORS COMPANY
  1. Use a small flat-bladed tool to release the locking tab on the connector.
    2. Fig 2: Releasing Connector
    GM2374631Courtesy of GENERAL MOTORS COMPANY
  2. Push down the locking tab to release the connector. The small flat-bladed tool may need to be pushed down and angled back slightly to depress the locking tab. Pull on the connector body while releasing the locking tab to disconnect the connector.
scientia non olet · About LEMON Manuals