LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Circuit Protection - Fusible Links

Circuit Protection - Fusible Links

Special Tools 

EL-39200  Digital Multimeter (DMM)

For equivalent regional tools, refer to Special Tools .

NOTE:

When repairing a fusible link, fusible links cut longer than 225mm (approximately 9in) will not provide sufficient overload protection.

Fusible link is wire designed to melt and break continuity when excessive current is applied. It is often located between or near the battery and starter or electrical center. Use a continuity tester or a Digital Multimeter (DMM) at each end of the wire containing the fusible link in order to determine if it is broken. If broken, it must be replaced with fusible link of the same gauge size.