Component Testing

Accessory Power Outlet 110V AC

1. Ignition OFF, remove the X81 Accessory Power Receptacle - 110V AC.
2. Test for infinite resistance between terminal 3 X2 and terminal 3 X1.
   • If less than infinite resistance 

     Replace X81 Accessory Power Receptacle - 110V AC.

3. Test for less than 2Ω between the following terminals:
   • The terminal 3 X2 and the applicable receptacle terminal
   • The terminal 3 X1 and the applicable receptacle terminal
   • If greater than the 2Ω 

     Replace the X81 Accessory Power Receptacle - 110V AC.

4. Test for infinite resistance between terminal 1 X1 and terminal 1 X2.
   • If less than the specified range 

     Replace X81 Accessory Power Receptacle - 110V AC.

   • If infinite resistance 
5. Connect a 110V extension cord without a connected device to the X81 Accessory Power Receptacle - 110V AC.
6. Test for less than 5Ω between terminal 1 X1 and terminal 1 X2.
   • If greater than the 5Ω 

     Replace the X81 Accessory Power Receptacle - 110V AC.

   • If less than 5Ω 
7. All OK