110 Volt Power Outlet Receptacle System Operation

The accessory DC/AC power inverter module receives fuse protected battery voltage and is connected to the 12V electrical system ground. The accessory power receptacle - 110V AC has an internal switch, that detects when an AC powered device is plugged into the outlet. When the ignition is ON, and an AC powered device is plugged into the accessory power receptacle - 110V AC, the normally open switch in the accessory power receptacle - 110V AC, closes. When the accessory DC/AC power inverter module detects the voltage from the accessory power receptacle - 110V AC switch, the inverter module begins to supply 110V AC to the accessory power receptacle - 110V AC after a 1.5s delay. The accessory AC power system is protected against circuit overload and circuit shorts to ground.