Removal Procedure
- Raise the vehicle and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the differential clutch cover to drain the differential clutch.
- Remove the vent hose fitting (2) and the hose (1) from the differential clutch cover.
WARNING:
The hydraulic pressure in the differential clutch is very high. To prevent personal injury, wait for at least 10 minutes before removing any parts from the differential clutch.
NOTE:
The vehicle should be as level as possible when performing this procedure.
NOTE:
To adjust the differential clutch fluid to the proper level without draining, go to step 12 of installation.
CAUTION:
It is very important to observe maximum cleanliness when working on the differential clutch. Dirt particles can seriously damage the function and service life of the differential clutch.