LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle >> Diagnostic Information and Procedures >> DTC C0406: Transfer Case Solenoid Valve Control Circuit High Current >> Circuit/System Verification

Circuit/System Verification

NOTE:

The Q48 Rear Drive Clutch Solenoid Valve is calibrated with and is part of the K47 Rear Differential Clutch Control Module. Both components must be replaced as a matched set.

  1. Engine running and vehicle stationary.
  2. Verify the scan tool Rear Drive Clutch Status parameter is Temporarily Limited.
    • If not Temporarily Limited 
    1. Verify DTC C0406 is not set.
      • If the DTC is set, replace the K47 Rear Differential Clutch Control Module.
      • If the DTC is not set
    2. All OK.
    • If Temporarily Limited 
  3. All OK.
scientia non olet · About LEMON Manuals