Circuit/System Verification
- Verify DTC C0035, C0040, C0045, or C0050 is not set.
- If any of the DTCs are set
Refer to DTC C0035, C0040, C0045, or C0050 .
- If none of the DTCs are set
- If any of the DTCs are set
- Replace the K17 Electronic Brake Control Module.
- Verify DTC C1207, C1208, C1209, C1210, C1221, C1222, C1223, or C1224 does not set while operating the vehicle within the Conditions for Running the DTC.
- If any of the DTCs are set
Replace the module that set the DTC.
- If none of the DTCs are set
- If any of the DTCs are set
- All OK.