Circuit/System Description

The parking brake control module has an internal motor, apply actuator, release actuator, and temperature sensor. The parking brake control module also contains the logic for applying and releasing the parking brake when commanded by the park brake control switch. When the parking brake control module receives a signal from the switch, the internal circuit board temperature is checked to verify it is within operating range before the control module performs the requested operation.

The parking brake control module will diagnose the internal park brake motor circuit to verify it is functioning properly. The park brake motor circuit is used to command motor operation, apply and release tension on the parking brake cable, which will apply and release the parking brake. The park brake will self diagnose the internal park brake motor circuit. This circuit is used to drive the motor, which pulls on the park brake cable, ultimately applying and releasing the park brake.

The parking brake control module contains an internal park brake motor position sensor which monitors the park brake motor position. The parking brake control module contains an internal park brake solenoid actuator, and performs diagnostics on the solenoid actuator circuitry to verify it is functioning properly.