Sunroof Panel/Window Guide Replacement

Fig 1: Sunroof Housing Assembly Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the sunroof housing. Refer to Sunroof Housing Replacement .
1	Sunroof Housing Rear Support Screw CAUTION: Refer to Fastener Caution . Tighten 7 N.m (62 lb in)
2	Sunroof Housing Rear Support
3	Sunroof Housing Assembly Screw (Qty: 9) CAUTION: Refer to Fastener Caution .
4	Sunroof Housing Assembly
5	Sunroof Panel Window Guide Assembly Procedure Wipe the perimeter of the frame area with a clean cloth. Slide the sunroof panel window guide cable forward in order to disengage from the sunroof frame while sliding the sunroof panel window guide rearward in order to disengage from the sunroof frame. When installing the sunroof panel window guide assembly, ensure the routing of the end of the cable is installed through the frame access holes and into the other guide.