LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Driver or Passenger Seat Back Cushion Frame Replacement (8-Way Power)

Driver or Passenger Seat Back Cushion Frame Replacement (8-Way Power)

Fig 1: Driver Or Passenger Seat Back Cushion Frame (8-Way Power)
GM2019879Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the front seat back cushion pad. Refer to Front Seat Back Pad Replacement (8-Way Power) .
  2. Remove the front seat lumbar support. Refer to Driver or Passenger Seat Lumbar Support Replacement (Driver/Passenger Seat Electric Lumbar) .
  3. Remove the front seat back cushion pad wire. Refer to Driver or Passenger Seat Back Cushion Pad Wire Replacement (8-Way-Power) .
  4. Remove the front seat recliner actuator motor. Refer to Front Seat Recliner Actuator Motor Replacement (Driver or Passenger Seat 8-Way Power) .
1 Driver or Passenger Seat Back Frame Fastener (Qty:4)
CAUTION:

Refer to Fastener Caution .


Tighten 
35 N.m (26 lb ft)
2 Driver or Passenger Seat Back Cushion Frame
scientia non olet · About LEMON Manuals