LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Drivetrain and Front Suspension Frame Insulator Replacement >> Removal Procedure

Removal Procedure

  1. Separate the frame from the body approximately 70 mm. Refer to Drivetrain and Front Suspension Frame Replacement .
    2. Fig 1: Bushing & Removal/Installation Tools
    GM2321609Courtesy of GENERAL MOTORS COMPANY
  2. Remove the bushings using J-45296-1  remover and installer and J-45725-2  replacer (2) .
scientia non olet · About LEMON Manuals