LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Fuel Tank Filler Pipe Housing Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Tank Filler Pipe Housing
    GM2020144Courtesy of GENERAL MOTORS COMPANY
  1. Insert the fuel tank filler pipe housing (1) to the body side outer panel.
    2. Fig 2: Fuel Tank Filler Pipe, Housing & Door Lock Actuator Wiring Harness Electrical Connector
    GM2020140Courtesy of GENERAL MOTORS COMPANY
  2. Install the fuel tank filler pipe (3) at the fuel tank filler pipe housing.
  3. Install the fuel tank filler pipe fastener (2).
  4. Connect the fuel tank filler door lock actuator wiring harness electrical connector (1).
  5. Install the rear wheelhouse panel liner.
  6. Install the right rear wheel.
scientia non olet · About LEMON Manuals