Rear Side Door Outside Handle Bracket Replacement (Passive Entry Passive)

Fig 1: Rear Side Door Outside Handle Bracket (Passive Entry Passive Start)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear side door water deflector. Refer to Rear Side Door Water Deflector Replacement . Remove the rear side door outside handle. Refer to Rear Side Door Outside Handle Replacement .
1	Release Rear Side Door Outside Handle Bracket Fastener CAUTION: Refer to Fastener Caution . Tighten 5 N.m (44 lb in)
2	Rear Side Door Outside Handle Bracket Procedure Remove the shift linkage lever clip. Disconnect the passive entry passive start sensor electrical connector. Transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Remove the rear side door water deflector. Refer to Rear Side Door Water Deflector Replacement .
Remove the rear side door outside handle. Refer to Rear Side Door Outside Handle Replacement .

Release Rear Side Door Outside Handle Bracket Fastener

CAUTION:

Tighten
5 N.m (44 lb in)

Rear Side Door Outside Handle Bracket

Procedure