Circuit/System Description

The body control module supplies a 12V reference voltage to the rear compartment lid unlatch switch through the release switch signal circuit. When the rear compartment lid unlatch switch is pressed, the release switch signal circuit is grounded through the rear compartment lid unlatch switch ground circuit and the reference voltage is pulled low within the body control module. In response, the body control module applies battery positive voltage to the compartment lid release relay control circuit, which energizes the coil side of the relay. The switch side of the compartment lid release relay then closes, supplying battery positive voltage through the relay and the rear compartment lid latch control circuit activating the latch so that the trunk lid may be manually raised to an open position.