Circuit/System Verification
- Ignition ON.
- Verify the scan tool Door Ajar Sw. parameter changes between Active and Inactive while opening and closing each vehicle door.
- If the parameter does not change
Refer to Door Ajar Indicator Malfunction .
- If the parameter changes
- If the parameter does not change
- Verify the scan tool Interior/Courtesy Lighting Master Switch parameter changes between Door, On, and Cancel while placing the dome lamp switch in the Door, On, and Cancel positions.
- If the parameter does not change
Refer to Dome Lamp Switch Malfunction.
- If the parameter changes
- If the parameter does not change
- Verify the dome/courtesy lamps turn ON and OFF while commanding the Courtesy Lamps ON and OFF with a scan tool.
- If the dome/courtesy lamps do not turn ON and OFF
Refer to Dome/Courtesy Lamps Malfunction.
- If the dome/courtesy lamps turn ON and OFF
- If the dome/courtesy lamps do not turn ON and OFF
- All OK.