Circuit/System Verification
- Ignition ON.
- Verify the scan tool Park Lamp Switch parameter changes between Active and Inactive while commanding the park lamps ON and OFF with the turn signal/multifunction switch.
- If the parameter does not change
Refer to Headlamp Switch Malfunction.
- If the parameter changes
- If the parameter does not change
- Verify the left park lamps turn ON and OFF when commanding the Left Park Lamps ON and OFF with a scan tool.
- If the left park lamps do not turn ON and OFF
Refer to Park Lamps Malfunction.
- If the left park lamps turn ON and OFF
- If the left park lamps do not turn ON and OFF
- Verify the right park lamps turn ON and OFF when commanding the Right Park Lamps ON and OFF with a scan tool.
- If the right park lamps do not turn ON and OFF
Refer to Park Lamps Malfunction.
- If the right park lamps turn ON and OFF
- If the right park lamps do not turn ON and OFF
- Verify the license plate lamps turn ON and OFF when commanding the License Plate Lamps ON and OFF with a scan tool.
- If the license plate lamps do not turn ON and OFF
Refer to License Plate Lamps Malfunction.
- If the license plate lamps turn ON and OFF
- If the license plate lamps do not turn ON and OFF
- All OK.