Hood Latch Support Replacement (Acadia, Enclave, Traverse)

Fig 1: Hood Latch Support

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the hood primary and secondary latch. Refer to Hood Primary and Secondary Latch Replacement .
1	Hood Latch Support Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten  10 N.m (89 lb in)
2	Hood Latch Support Bolt (Qty: 2) Tighten  10 N.m (89 lb in)
3	Hood Latch Support Unclip the electrical harness from the hood latch support.