Transmission Control Lever Knob Replacement
Courtesy of GENERAL MOTORS COMPANY Transmission Control Lever Knob Replacement
| Callout |
Component Name |
Preliminary Procedure Set the parking brake and, with engine OFF, shift transmission to neutral. |
| 1 |
Transmission Control Lever Knob Procedure
- Unclip the transmission control indicator opening cover from the central console.
- Disconnect the range indicator connector.
- Remove the transmission control lever knob from the transmission control. Pulling upward with a twisting motion will aid in disengaging the retainer.
NOTE:
The transmission control lever knob is only available along with the control lever boot and the control indicator opening cover as an assembly.
|