Circuit/System Verification
- Ignition ON.
- Verify the scan tool Fuel Level Sensor parameter is between 0.5-3.5 V and varies with fuel level.
- If not between 0.5-3.5 V or does not vary with fuel level
Refer to Circuit/System Testing
- If between 0.5-3.5 V and varies with fuel level
- If not between 0.5-3.5 V or does not vary with fuel level
- Verify the all fuel level gauge segments illuminate when performing the scan tool Driver Information Center Segments control function.
- If any fuel level gauge segments do not illuminate
Replace the P16 instrument cluster
- If all fuel level gauge segments illuminate
- If any fuel level gauge segments do not illuminate
- All OK.