LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2012 >> Regal Turbo, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Headlamp Switch Molding Replacement

Headlamp Switch Molding Replacement

Fig 1: Headlamp Switch Molding
GM2193982Courtesy of GENERAL MOTORS COMPANY
Headlamp Switch Molding Replacement

Callout Component Name
1 Instrument Panel Headlamp Switch Molding Fastener (Qty: 4)

Procedure

  1. Open instrument panel outer compartment.

    TIP:  Use a flat-bladed plastic trim tool to release the headlamp switch molding from the instrument panel.

  2. Disconnect the electrical connections.
2 Instrument Panel Headlamp Switch Molding
Procedure 
If replacing the instrument panel headlamp switch molding, transfer the headlamp switch.
scientia non olet · About LEMON Manuals