Park, Tail, License and Marker Lamps

The rear tail, stop, and turn signal functions are performed by light emitting diodes (LED) in the tail lamp assemblies. The rear side marker lamps uses LEDs and are part of the tail lamp assemblies which wraps around the corner of the vehicle. The front park and side marker lamps are part of the front headlamp assembly. The front side markers uses LEDs the front position lamps use an incandescent bulb. The BCM sends out a PWM signal to illuminate all park, tail, license, and marker lamps as soon when the headlamp switch is placed in the PARK LAMP or HEADLAMP position or anytime the headlights are requested. The park lamps are also turned on with the front fog lamps.