Clutch Pedal Position Sensor / Switch: Service and Repair

Clutch Pedal Position Sensor Replacement

Removal Procedure





1. Disconnect clutch pedal position sensor wiring harness connector.

2. Remove clutch pedal position sensor bolt (2).

3. Remove clutch pedal position sensor (1).

Installation Procedure





1. Install clutch pedal position sensor (1).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install clutch pedal position sensor bolt (2) and tighten to 3 Nm (27 lb in).

3. Connect clutch pedal position sensor wiring harness connector.

4. Learn clutch pedal position sensor.