Steering Wheel Inflatable Restraint Module Replacement
Courtesy of GENERAL MOTORS COMPANY Steering Wheel Inflatable Restraint Module Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
- Locate tool access hole on side of steering wheel.
- Using a blunt-ended tool, push the spring fastener inward through the access hole. Repeat the step for the other opening.
|
| 1 |
Steering Wheel Inflatable Restraint Module
- Remove the connector position assurance (CPA) retainer.
- Disconnect the electrical connectors.
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflatable Restraint Module Handling and Scrapping .
|